The cutting edge of a lens shaped cross secheniem.Razrez in the seam direction.
Very smooth weld line for all skin types.
Manufacture of footwear, bags and suitcases with a large embossed seam in the production of belts and suspenders.


Pearl edge series P, PCL, PCR

The cutting edge of a lens shaped cross secheniem.Razrez across the seam direction.
Very durable seam for all skin types in the production of handbags, luggage and accessories.
Features:
When driving up the needle thread of the cross-linkable material is placed in a recess on the edge, so that the thread is not pulled over the edge of the eye and the cutting edge of the tip of the needle, so that will not be damaged.
CL: the notch on the tip with the release of the left to the shuttles to the right of the needle
CR: recess on the cutting edge with access to the right to the shuttles to the left from the Needles of this design are used as the left (CR) and right (CL) of needles of the two-needle machines.


Right-hand edge of skin LR

 

The cutting edge of a lens shaped cross secheniem.Razrez carried out at an angle of 45 degrees to the direction of the seam.
A decorative seam inclined to the left (LR) for all skin types.
Manufacture of footwear, bags and suitcases with a large embossed seam in the production of belts and suspenders.


Very wide right-hand edge of the edge of the skin for the LBR

 

The cutting edge of a lens shaped cross secheniem.Razrez carried out at an angle of 45 degrees to the direction of the seam. In this section the needle length exceeds the diameter of the needle shaft.
A decorative seam inclined to the left (LBR) for all skin types.
Feature: For decorative stitches, the defining product design in the manufacture of upholstery, bags, luggage, clothing.


Left-hand edge of the skin LL LLCR

 

The cutting edge of a lens shaped cross secheniem.Razrez carried out at an angle of 135 degrees to the direction of the seam.
Slightly recessed straight seam for all skin types.
LL - for the manufacture, repair, shoes, bags, suitcases.
LLCP - in the manufacture of shoes that would look no different lines at different positions of the bobbin with respect to the needle.


Diamond-shaped edge of DI

 

The cutting edge of the diamond-shaped cross-section. Centered incision made in the joint direction. Appearance of the same seam as the application tip blade (S), but the DI four cutting edges of the tip provides easier penetration of the needle into the heavy solid materials.

For severe dry, firm skin in the manufacture of bags, suitcases, shoes.

Result: Absolutely precise, with no defects seam, the correct location of the puncture site, the lack of needle deflection.

Three-sided cutting edge D

The cutting edge of a triangular cross-section, the result is a straight seam.

  For severe dry, firm skin in the manufacture of bags, suitcases, shoes for processing plastics, cardboard, paper.

 

Average trihedral tip DH

The cutting edge with a triangular cross-section is smaller than the tip D.

Composite materials, matting materials with profilyamiiz synthetic materials, pressing hard nylon, canvas, tent materials.

It is used as well for the manufacture of the interior of vehicles, tents, awnings, furniture.

The square tip with a sharp right-VR

 

The cutting edge of the diamond-shaped cross-section.

Cut at a 45 degree angle to the direction of the seam.

Suture stitches with a slight tilt to the left

The best cutting effect than the comparable right-hand edge of skin LR.

The hard, dry skin, footwear, bags and suitcases.

With four cutting edges are guaranteed correct positioning the puncture site and the lack of needle deflection.

 

Round tip with a small triangular tip cutting SD1R

 

The tip of a very small triangular cutting tip, which accounts for about 10% of the resulting hole, 90% is obtained by stretching the tapered portion of the tip.
A smaller incision than with the other cutting tip.
For delicate, thin skin, natural and artificial leather for clothing, materials processing with hard fibers and films.
Feature: in the performance of joints with varying directions (sewing machines) Location stitches with respect to the seam line remains the same.

 

 

We have 100 guests and no members online